Goulds 3hp Self-Priming Centrifugal Pump GT30
Product Description
GOULDS GT30 3HP IRRI-GATOR SERIES SELF PRIMING PUMP
230V, 1PH, 1 YEAR MANUFACTURER'S WARRANTY
GOULDS PUMP SPECIFICATION
Specifically designed for the following uses: • Lawn sprinkling • Irrigation • Air conditioning systems • Heat pumps • Water transfer • Dewatering
PUMP:
• Pipe connections:1½” NPT suction1½” NPT discharge • Capacities: to 110 GPM at 5 foot suction lift • Heads: to 128 feet • Reprime capabilities: to 25 feet suction lift • Maximum working pressure: 125 PSIG • Maximum water temperature: 140° F (60° C) • Rotation: clockwise when viewed from motor end.
MOTOR:
• NEMA standard open drip proof • 60 Hz, 3500 RPM • Stainless steel shaft • Single phase: ¾–1½ HP, 115/230 V; 2 and 3 HP, 230 V only. Built-in overload with automatic reset. • Three phase: 230/460 V. Overload protection must be provided in starter unit. Starter and heaters (3) must be ordered separately. • Optional TEFC motors are available.
Self-Priming Design: Once pump is initially primed, filled with water, it will reprime when the water level rises above the end of the suction pipe. Serviceable: •Back pullout design allows disassembly of pumpfor service without disturbing piping. •Two compartment motor for easy access to motor wiring and replaceable components. Diffuser (Guidevane): Bolt down diffuser provides positive alignment with impeller. Diffuser has stainless wear ring for extended performance in abrasive conditions. F.D.A. compliant, injection molded, food grade, glass filled Lexan® for durability and abrasion resistance. Impeller: F.D.A. compliant, glass filled Noryl®. Corrosion and abrasion resistant. Corrosion Resistant: Electro-coat paint process is applied inside and out, then baked on. Casing: Cast iron construction. Four (4) bolt, back pull-out design. Tapped openings provided for vacuum gauge and casing drain. Powered for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage. Mechanical Seal: Carbon/ceramic faces, BUNA elastomers. 300 series stainless steel metal parts. Pump design prevents the seal from running dry. .
230V, 1PH, 1 YEAR MANUFACTURER'S WARRANTY
GOULDS PUMP SPECIFICATION
Specifically designed for the following uses: • Lawn sprinkling • Irrigation • Air conditioning systems • Heat pumps • Water transfer • Dewatering
PUMP:
• Pipe connections:1½” NPT suction1½” NPT discharge • Capacities: to 110 GPM at 5 foot suction lift • Heads: to 128 feet • Reprime capabilities: to 25 feet suction lift • Maximum working pressure: 125 PSIG • Maximum water temperature: 140° F (60° C) • Rotation: clockwise when viewed from motor end.
MOTOR:
• NEMA standard open drip proof • 60 Hz, 3500 RPM • Stainless steel shaft • Single phase: ¾–1½ HP, 115/230 V; 2 and 3 HP, 230 V only. Built-in overload with automatic reset. • Three phase: 230/460 V. Overload protection must be provided in starter unit. Starter and heaters (3) must be ordered separately. • Optional TEFC motors are available.
Self-Priming Design: Once pump is initially primed, filled with water, it will reprime when the water level rises above the end of the suction pipe. Serviceable: •Back pullout design allows disassembly of pumpfor service without disturbing piping. •Two compartment motor for easy access to motor wiring and replaceable components. Diffuser (Guidevane): Bolt down diffuser provides positive alignment with impeller. Diffuser has stainless wear ring for extended performance in abrasive conditions. F.D.A. compliant, injection molded, food grade, glass filled Lexan® for durability and abrasion resistance. Impeller: F.D.A. compliant, glass filled Noryl®. Corrosion and abrasion resistant. Corrosion Resistant: Electro-coat paint process is applied inside and out, then baked on. Casing: Cast iron construction. Four (4) bolt, back pull-out design. Tapped openings provided for vacuum gauge and casing drain. Powered for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage. Mechanical Seal: Carbon/ceramic faces, BUNA elastomers. 300 series stainless steel metal parts. Pump design prevents the seal from running dry. .
Thank You For Shopping At Redland Supply!
Sale Prices are good online only.
Visit our Redland Supply Blog Or follow Us On Twitter
